How To Install Kwikset Smartcode 888

If y'all want a simple smart lock with a keypad, Kwikset'south SmartCode lineup gives you a handful of options to choose from. Hither's how to install and set them up.

RELATED: Are Smart Locks Secure?

Nosotros're using the SmartCode 916 lock, specifically, which comes with a touch screen of sorts that hides the keys until you touch it. It tin can as well connect to a smarthome hub via a Z-Moving ridge or ZigBee connection. However, be aware that while Kwikset smart locks are compatible with the Wink hub, you'll just be able to lock and unlock it from the Flash app and that'southward information technology. Other hubs also allow you do things like manage user codes, but if y'all desire something that will work completely with Wink, check out the Schlage Connect.

RELATED: How to Install and Ready Up the Schlage Connect Smart Lock

In any instance, allow's get started. The installation process is almost identical across the whole SmartCode lineup. So no affair which 1 you lot have, you'll be able to follow along just fine.

Step One: Remove Your Existing Deadbolt

Start, you'll need to remove the current deadbolt installed on your door. This usually simply involves removing a couple of screws from the lock's face plate on the inside of your home.

Subsequently removing those screws, the entire deadbolt should come autonomously pretty hands. Just separate the exterior and within portions of the deadbolt to remove the whole thing from the door. Y'all may take to slightly tap on information technology with a mallet to loosen it up if information technology doesn't come off easily.

Next, you'll demand to remove the latch. Notwithstanding, if your existing deadbolt is from Kwikset, you can use the existing latch and keep it installed, equally it's identical to the one that the smart lock comes with. If you practise need to remove the existing latch, but remove the two screws holding it in place and pull it straight out.

You at present have a clean slate to install your new smart lock. Permit's get to the good function!

Stride Ii: Install the SmartCode Smart Lock

To begin install the new door latch if you're not using an existing ane. Slide the latch into the door, making sure that the heart hole in the latch is centered within the hole in the door. If information technology'southward non, remove the latch and rotate the mechanism 180 degrees (while holding onto the actual deadbolt) to change the position of the heart hole. Re-insert the latch, making sure the "Upwards" marking on the latch is facing up.

Secure the latch to the door using the two short screws included with the kit.

Starting on the within of the door, identify the lock by feeding the cable underneath the latch and inserting the turn rod through the middle latch hole. Brand sure to line up the "D" shape of the rod in order to go it in.

On the outside, place the mounting plate over the hole and feed the cablevision through it. Secure information technology to the rest of the lock using the two long bolts included in the kit. This should now concur the lock in place on your door.

Next, separate the encompass from the mechanism and remove the battery pack.

Connect the cablevision from the keypad side of the lock to the machinery and tuck any of the excess cable into the actress space within.

After that, install the mechanism onto the door, making certain to line it up with the plow rod and so that it slides into the hole on the machinery.

Secure the mechanism to the door using the two small-scale Phillips screws included in the kit and using the lower screw terminals on the sides.

Adjacent, insert four AA batteries into the bombardment pack and re-insert the battery pack into the mechanism.

The lock will beep and the status light will calorie-free upwards. From in that location, the lock should activate a couple of times and so beep again. If you see a checkmark calorie-free up on the keypad, and so the installation was successful. If not, there was a trouble with the installation—something may not be lined upwards in relation to the turn rod, or the deadbolt is blocked or getting caught on something.

Once successful, install the cover on the mechanism using the two small hex screws and the included allen central.

Subsequently installation, the lock is technically ready to go, but you need to add a user code if you want to unlock information technology using the keypad. You tin do this by taking off the blackness interior encompass piece and pressing the plan button while the door is unlocked.

Next, tap the checkmark on the keypad and then enter in the user lawmaking that yous want to use, which must exist between iv and 8 digits. When done, tap on the lock push on the keypad.

To activate the screen at any time (thus illuminating the keys), you tin can either press on it with your palm, affect the lower-left area, or tap on the screen with three or more than fingers.

Step Three: Connect Information technology to Your Smarthome Hub

SmartCode locks tin can be used without a smarthome hub, but the whole indicate of a smart lock is that you can control and manage the lock remotely from your phone, which is why information technology's platonic to connect it to a smarthome hub.

How you do this is completely dependent on what type of hub you accept, but the process should exist generally the same all effectually. In my case, I'g going to connect the lock to my Flash hub.

You'll showtime demand to open upward your smarthome hub's app and navigate to where y'all add together a device to the hub to put it in search/discovery mode.

In one case that's done, printing the "A" push button on the back of the smart lock.

Wait a few seconds and the lock volition connect to your hub.

From there, you can manage and control the lock from the app.

Equally mentioned at the start, Kwikset smart locks aren't fully compatible with the Wink hub, and yous can only lock or unlock it from the app.